Products

+
  • 焦油研磨机.jpg

Tar grinder

Nantong Fleck Fluid Equipment CO., LTD. is a specialized equipment technology manufacturer engaged in the research and development, design, production and sales of wet shear crushing, dispersion emulsification, crushing and grinding, mixing and homogenization, garbage disposal and other equipment. Currently, it has 1 new technology research and development building, 1 graduate practice building, 1 new product project research and development team, and 2 "production, learning and research" cooperation units in universities.

Key words: shear pump | wet mill | rice refiner

Classification:

Shear and Crushing Series

  • Product Description
  • The tar residue first enters a mixing and liquefaction tank for agitation and liquefaction, then is fed into a tar residue grinder for shear grinding. It is subsequently sucked up by a tar residue transfer pump and conveyed to a two-phase centrifuge for solid-liquid separation.

    Product Features

    The tar residue grinder consists of a low-power motor, a reducer, a gearbox, and a blade housing, among other components. Its working principle is as follows: After the tar residue and ammonia water are stirred and liquefied in a liquefaction tank, the mixture is fed into the tar residue grinder. The tar residue enters the crushing chamber through the feed inlet, where it is sheared and crushed by two sets of counter-rotating roller blades into tiny particles.

    The upper flange of the tar residue grinder serves as the feed inlet, while the lower flange acts as the discharge outlet. The flange standard is HCT20592-2009. The pipe diameters at the inlet and outlet are either DN80/DN80 or DN100/DN100. The optimal connection method for the tar residue grinder’s inlet and outlet is via flexible hoses. After completing the installation of the equipment pipelines, it is essential to thoroughly remove any residual materials from the pipes. Before connecting the electrical wires, briefly jog the motor to verify that its rotation direction matches the direction indicated by the arrow. When the tar residue grinder requires maintenance, first disconnect the power supply. Then, unscrew the vent screw on the top cover of the feed hopper, followed by unscrewing the drain screw located beneath the grinder. Completely empty the grinder of any remaining tar residue and ammonia water before reopening the feed hopper.

    If a malfunction is detected in the tar grinder, perform the following checks: First, verify whether the main spindle can rotate; second, check whether there are any hard foreign objects on the double blades; third, inspect the blade teeth for any fractures; fourth, determine whether the bearings need to be replaced; fifth, assess whether the skeleton seal needs to be replaced; sixth, examine whether the gears inside the gearbox are damaged; and finally, check whether the lubricating grease needs to be replaced.

    Product Parameters

    Device model Motor Processing capacity Import and export dimensions Feed size Discharge size External dimensions
    JYZ-FSB/6 1.5kw 6m3/h DN80/DN80 ≤20mm ≤3mm 850*580*650
    JYZ-FSB/8 2.2kw 8m3/h DN80/DN80 ≤20mm ≤3mm 870×610×680
    JYZ-FSB/10 3.0kw 10m3/h DN80/DN80 ≤20mm ≤3mm 870×610×680

    Product appearance

图片名称

Note: Our company can tailor solutions based on the characteristics of your material medium:

1. Conduct material testing using production-grade equipment

2. Customize equipment selection according to your material's technical specifications

3. Different materials require distinct internal structures. The following equipment internal diagrams are provided for user reference.

For detailed technical specifications, please contact:

Technical Support: 18962835399 18068155581

Sales Hotline: 18912883100 18921623100

Copyright © Nantong Fleck Fluid Equipment CO., LTD. All rights reserved. Unauthorized reproduction is strictly prohibited.

Related Products


High gravity reactor


The material A in the reaction tank is metered to the premixing reaction device at constant pressure through the circulating pump, and the material B in the metering tank also enters the distributor of the premixing reaction device through the flowmeter to carry out the primary mixing reaction with the material A.

Messages

Security verification
Submission