Solid-liquid ribbon cone mixer

Nantong Fleck Fluid Equipment CO., LTD. is a specialized equipment technology manufacturer engaged in the research and development, design, production and sales of wet shear crushing, dispersion emulsification, crushing and grinding, mixing and homogenization, garbage disposal and other equipment. Currently, it has 1 new technology research and development building, 1 graduate practice building, 1 new product project research and development team, and 2 "production, learning and research" cooperation units in universities.

Key words: shear pump | wet mill | rice refiner

Classification:

Homogeneous mixing

Message

Related Products

Product Description

固液螺带锥型混合机 Product brief

There is no transmission mechanism in the cylinder of the solid-liquid screw belt cone mixer, which fundamentally prevents material pollution caused by lubricating oil leakage, has reliable and stable operation, and is especially suitable for mixing and mixing of high viscous fluid or thick, wet and paste-based materials with high sanitary requirements. At the same time, it is also suitable for mixing powder and particles.

Technical parameters

Model	Full volume m³	Working volume m³	Power kw	Overall dimension mm
HHJ-01YF	0.1	0.06	3	820*1750
HHJ-03YF	0.3	0.18	4	1040*1900
HHJ-05YF	0.5	0.3	7.5	1180*2600
HHJ-1YF	1	0.6	11	1470*3000
HHJ-2YF	2	1.2	18.5	1860*3800
HHJ-3YF	3	1.8	22	2050*4200
HHJ-4YF	4	2.5	30	2250*4350
HHJ-5YF	5	3	37	2350*4600

Note: The relevant power and dimensions in this table are for reference. The specific power and external dimensions should be adjusted according to the corresponding characteristics and working conditions of the materials.

固液螺带锥型混合机 Product Features

Solid-liquid spiral belt cone mixer is widely used in various solid-liquid mixing and drying processes in industrial production. This machine has triple mixing effect and can obtain good mixing in an extremely short time. Features: 1. No support at the bottom, rapid and thorough discharge, no retentate. 2. Through special design, the equipment meets the requirements of GMP standard. The mixing is gentle and will not deteriorate the raw material mixture.

The machine is directly driven by the reducer to rotate the agitator without any transmission mechanism in the cylinder. Basically, the gap between the outer screw belt and the container wall is small due to the leakage of lubricating oil, so as to prevent the material from sticking. The machine has a compact overall structure, a small floor area and convenient discharging. The cantilever shaft structure, the bearing end does not contact the material, and the gap between the stirring paddle and the container wall is small to prevent the material from sticking. Standardized stirring drive box to ensure stable operation.

Product Principle

The strong mixing effect, so that the material near the container wall upward movement and the center of the material downward movement

Mixing of flowing materials softly but completely, a large number of materials can be mixed in a short time

◆ Can achieve a high standard of uniform mixing

◆ Almost all materials can be discharged clean

Note: The user provides relevant parameters of material characteristics, or brings materials to the production base for on-site testing, and the manufacturer selects the internal structure of the grinding disc according to the characteristics of the medium.

The copyright and equipment pictures of this website belong to Nantong Flake, and those who pirate will be prosecuted.

Application areas

Daily Chemical:AES, LAS, AOS, MES, K12, glycerin, sorbitol, fatty alcohol, shower gel, skin cream, shampoo, hand sanitizer, toothpaste, soap, washing powder slurry, etc.

Fine Chemicals:Dyes, pigments, various slurries, chemical additives, adhesives, 107 glue, silicone oil, leather oil, emulsion explosives, and other colloidal materials.

Food:Chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated juice, jam, ice cream, milk, yeast slurry, meat slurry, jelly, condiments, lees, soy protein, flour slurry, etc.

Papermaking:Polyacrylamide (PAM), calcium carbonate, starch paste, carboxyl butyl benzene/propyl benzene latex, rosin, rosin gum, pulp, filler, dry strength: agent, wet strength agent, sizing agent, retention aid, defoamer, coating, water treatment chemicals, etc.

Chemical fiber:Viscose pulp porridge, PVA, vinylon pulp, acrylic pulp, amine pulp, polyester chips, polyester, polypropylene, man-made fibers, functional fibers, etc.

Medicine:All kinds of ointment, extract, medicine emulsion, pill paste, syrup, medicine, etc.

Paint:Paint, coating, ink, insulating paint, resin, additives, etc.

Note: Our company can tailor solutions based on the characteristics of your material medium:

1. Conduct material testing using production-grade equipment

2. Customize equipment selection according to your material's technical specifications

3. Different materials require distinct internal structures. The following equipment internal diagrams are provided for user reference.

For detailed technical specifications, please contact:

Technical Support: 18962835399 18068155581

Sales Hotline: 18912883100 18921623100