Welcome to Nantong Fleck Fluid Equipment CO., LTD.!
Discussion on matters needing attention in daily use of high shear dispersing emulsifying machine
high sheardispersion emulsifying machineDiscussion on matters needing attention in daily use
The high-shear dispersion emulsifying machine is an important equipment in the cream production line. It is mainly used to emulsify and homogenize materials to obtain ideal products. It has been widely used in many industries. There are two forms of equipment installation, namely, the upper homogenization The mold is installed on the top of the pot cover, and the lower homogenization mold is installed on the bottom of the pot. It is usually called the upper homogenization emulsifier or the lower homogenization emulsifier. What is the difference between the two forms?
These two emulsifying machines can be designed as internal circulation emulsifying machine or external circulation emulsifying machine according to customer needs. The advantage of the homogenizer is that it can easily handle various products. The mixing homogenizer of the pot cover is connected with the frame, which can be raised and lowered. Easy to operate and clean, the laboratory large-tonnage processing capacity emulsifying machine adopts the upper homogenization method, and the structure design is reasonable.
The advantage of the lower homogenizing emulsifier is that the motor is installed at the lower part of the emulsifying tank, and the emulsifier is located at the bottom of the emulsifying tank. When mixing evenly, the material mixing has the auxiliary effect of gravity. This structural design is simpler than the upper homogenizing machine and the cost is relatively low. However, when using the lower homogenizing machine, it will be more troublesome to clean up a small amount of residual materials. If it is not used for batch processing of individual product materials, need CIP cleaning equipment, the price requirements will be higher, high sheardispersion emulsifying machineIn daily use, you should pay attention to maintenance to improve production efficiency and extend the service life of the high-shear dispersing emulsifier. Here is a detailed method for you:
1. Ensure the safety of equipment and electrical control system before use.
2. The medium of the material is different. The inlet and outlet filters must be cleaned regularly. The material entering the working chamber must be fluid. Dry powder materials and caking materials are not allowed to enter the machine directly.
3. It should be easy to move the spindle by hand, the weight should be uniform, and there should be no other friction sound or foreign body rolling sound.
4. During the operation of the equipment, once abnormal sound or other faults are found, stop and check immediately, and continue to run after troubleshooting.
5. If the processed material crystallizes and precipitates, or becomes viscous after cooling (heating), has poor fluidity, even is in the form of a mud cake, and has poor fluidity, at the end of production or temporarily comes to an end, the remaining materials in the cavity and the crushing cavity at all levels must be drained and cleaned, otherwise the equipment will be damaged and shaft leakage will occur again.
6. Avoid idling when using, so as not to cause high temperature or crystallization and solidification of the material during work, and damage the equipment. If the accessories are found to be excessively worn, the corresponding parts should be replaced in time.
The above is the small editor to explain "high sheardispersion emulsifying machineI hope the above content can help you better understand and use this high-shear dispersing emulsifying machine equipment.
Recommended Information
Crushing pump - pigment crushing test
2023-11-30
Precautions for operating an emulsifier
2023-11-14
Delivery of hygienic rice grinder
2023-11-07
Polyacrylamide mixed homogenization test
2023-10-23
Contact Information
No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province
Focus on us
Mobile Website
Copyright©2023 Nantong Fleck Fluid Equipment CO., LTD.
Powered by 300.cn | SEO | Business License