Welcome to Nantong Fleck Fluid Equipment CO., LTD.!
Brief description of the purpose and maintenance method of using the dispersion emulsifying machine
Brief description of usedispersion emulsifying machineThe purpose and maintenance method
Dispersion emulsification machine manufacturers tell everyone that emulsification is the function of a liquid evenly dispersed in another immiscible liquid in the form of tiny droplets. This is an emulsion-liquid interface phenomenon. Two immiscible liquids, such as oil and water, are divided into two layers in a container, with oil with low density in the upper layer and water with high density in the lower layer. If appropriate surfactant is added and stirred strongly, the oil will disperse in the water to form an emulsion, a process called emulsification.
dispersion emulsifying machineDriven by the motor at high speed, the material moves at high speed in the narrow gap between the multi-layer rotor and the stator. Under the action of the special structure, the material is subjected to high-speed shear of hundreds of thousands or even millions of times per minute in the working cavity, forming strong hydraulic shear and turbulence, so that the material is coordinated by the comprehensive effects of centrifugation, extrusion, grinding, collision and crushing, fully disperse, homogenize, emulsify, crush, refine and mix.
The purpose of using a dispersion emulsifying machine is to reduce the number of small particles in the liquid to improve the uniformity and stability of the liquid. These particles can be solid or liquid, which can reduce the average diameter of the particles and increase the number of individual particles. As a result, the distance between the particles decreases and the surface area increases. The surface area and average particle spacing of the particles will affect the rheology of the liquid. If the specific gravity of the particles in the liquid is different, the homogeneity of the mixture will affect the stability of the dispersion. If most particles are similar in size, the tendency to agglomerate during sedimentation or ascent will be reduced because similar particles have similar ascent or sedimentation velocities.
The following Xiaobian wants to share with you is the maintenance method of pipeline dispersion emulsifying machine:
1. Users should ensure that the equipment, homogeneous head, engine and control system are clean and sanitary, and do a good job of moisture-proof and anti-corrosion. The frequency converter should do a good job of ventilation, dust removal and other heat dissipation work, otherwise it is easy to corrode in water, and even damage electrical equipment when working again.
2. The safety valve should be checked regularly to prevent the valve from rusting, and the drain valve should be checked regularly to prevent debris from being blocked; the water system should be kept unblocked. If the vacuum pump is blocked during use, please stop the vacuum pump immediately, and then start the vacuum pump after cleaning. Because in use, sometimes the motor will be burned to death due to rust or foreign matter, and the homogeneous head will be stuck, so check whether there is lock during daily maintenance, ensure the normal high-speed operation of the equipment.
The above isdispersion emulsifying machineI hope the above content can help you better understand and use this high-shear dispersing emulsifying machine equipment. Thank you for watching. See you next time.
Next Page
Recommended Information
Crushing pump - pigment crushing test
2023-11-30
Precautions for operating an emulsifier
2023-11-14
Delivery of hygienic rice grinder
2023-11-07
Polyacrylamide mixed homogenization test
2023-10-23
Contact Information
No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province
Focus on us
Mobile Website
Copyright©2023 Nantong Fleck Fluid Equipment CO., LTD.
Powered by 300.cn | SEO | Business License