Welcome to Nantong Fleck Fluid Equipment CO., LTD.!
Matters needing attention of rice refiner
In the process of making,rice refinerIt is a very important link and the main process after soaking. The soybean protein film will become very soft and tender, but it will add water to the hydrolyzed soybean protein dissolved in the case of crushing. The basic process that can be properly broken is called Pulping. Rice refiner should pay attention to several points: in general, after the soybean protein film is broken, theoretically, the finer the grinding, the more conducive to the dissolution of protein, but in the actual production process, the fineness of soybean milk control should be combined with the mesh size of the filter screen, rather than the finer the better grinding, this is what we should pay attention.
If the grinding fineness is too fine, then in the process of centrifugal separation, the fiber in the soybean is likely to enter the soybean milk through the filter, so that the product produced is darker in color, the hair plate is rigid and has no elasticity, and even the taste is rough. However, if the grinding fineness is too thick, in the centrifugal separation process, it is possible to block the filter, resulting in excessive soybean protein discharged with the bean dregs, affecting the product yield, will affect economic benefits.
In general,rice refinerIn the grinding process, according to the rotation of the grinder and the size of the grinding pieces, add 1 to 2 times the weight of the soybean water. The amount of water added and the amount of soybeans added to the mill should be kept constant to ensure the uniformity of the paste fineness. If the amount of water added and the amount of beans added cannot be kept constant, the thickness of the fineness of the soybean milk will fluctuate accordingly, which will affect the control of the subsequent process.
At the same time, we should pay attention to the observation of bean dregs. In general, we will knead bean dregs with our hands. Bean dregs do not stick to our hands and do not ooze white soup as the standard. The ground soybean dregs are generally sawdust type, uniform thickness and non-stick, slurry and slag directly separated. Generally, it is difficult to measure the fineness of soybean milk in the actual operation process. Generally, the control of the fineness of soybean milk is based on empirical observation. Soymilk is a state of water ripple and uniform outflow, without obvious graininess, while the color of soybean milk is uniform milky white as the standard.
The installation process of the rice refiner is very important, and users need to read the instructions carefully. Follow the instructions to connect the power cord step by step. At the same time, for safety reasons, be sure to connect a reliable ground wire. Generally speaking, the rotation of the grinder is counterclockwise, so do not reverse the connection when wiring, so as not to damage the machine and waste raw materials.
There are three points to pay attention to when the rice refiner is turned on: touch the basket with your hand, if the basket can rotate freely, this means that the machine can be turned on normally. If it cannot rotate, it is necessary to check whether the hanging basket is damaged and repair it in time. After the 2. starts the motor, water can be added to the mill, and then soaked crops can be added to grind. Third, when grinding the first time, an appropriate amount of water can be added to the slag for secondary stirring, which can improve the slurry output rate.
Many users think that the rice refiner grinder can be directly turned off the power supply. As we all know, this practice will only accelerate the aging of the grouting machine. It is recommended to shut down the machine after the flow of clean water in the grouting machine. In addition, inrice refinerAfter the power is cut off, the residual material in the machine should be cleaned in time and the pipeline in the machine should be dredged to ensure the normal operation next time. It is worth noting that users must not directly clean the machine with clean water. They can wipe the inside and outside of the machine with clean water to prevent water from entering the motor.
Previous Page
Previous Page
Recommended Information
Crushing pump - pigment crushing test
2023-11-30
Precautions for operating an emulsifier
2023-11-14
Delivery of hygienic rice grinder
2023-11-07
Polyacrylamide mixed homogenization test
2023-10-23
Contact Information
No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province
Focus on us
Mobile Website
Copyright©2023 Nantong Fleck Fluid Equipment CO., LTD.
Powered by 300.cn | SEO | Business License