Welcome to Nantong Fleck Fluid Equipment CO., LTD.!
What matters should be paid attention to when operating the fine emulsifying machine
When the fine emulsifying machine is placed in the customer's production and manufacturing industrial plant, it is necessary to carry out specific production and manufacturing. Before the actual operation of the fine emulsifying machine, we should master some taboos that should be paid attention to to avoid safety accidents caused by human factors. We can check one by one from the following levels. After the verification, we can carry out the next step of production and manufacturing.
The 1. must first be connected to the switching power supply, and the grounding wire of the fine emulsifying machine must be connected reliably to ensure the safety of power consumption. Otherwise, it is very easy to produce disaster.
2., when the switching power supply is connected, everyone will turn the homogenizing head of the fine emulsifying machine to observe the conversion of the homogenizing head. Looking from top to bottom, rotating in the opposite direction indicates proper wiring. If rotating in the clockwise direction, it indicates that the wiring is reversed and the switching power supply should be connected again.
3.fine emulsifying machineUnder the condition of no substance, high speed is prohibited to avoid burning, burning rolling bearings and hydraulic seals.
In the case of 4. vacuum packaging, we must first fill the water storage tank of the mechanical pump to avoid the high speed of the mechanical pump. When starting the mechanical pump at the first time, check whether the vacuum solenoid valves are closed to avoid steam leakage and insufficient vacuum value.
5. before turning off the mechanical pump, turn off the gate valve in front of the mechanical pump to avoid air exposure. When the lid must be raised in Ran Ran, the air filter must be opened first to turn the pot body into superheated steam, and then the actual operation of the elevator will be carried out.
6. mechanical pumps must not be opened without a closed cover. If they are unique, they must be started for no more than three minutes to avoid damage.
7., when the raw materials need to heat up, first ensure that there is a heating substance in the collet of the fine emulsifying machine to avoid empty burning and destroy the heating pipe.
8. in actual operationfine emulsifying machineIn the whole process, if there is a noise, be sure to cut off the power immediately, and then the actual operation can be carried out after the reason is found out.
9., in the whole process of the operation of the fine emulsifying machine, it is forbidden to stretch the body at all positions of the human body to avoid accidents.
10. cleaningfine emulsifying machineIn the case of, be sure to disconnect all switching power supply can be carried out to prevent accidents.
Previous Page
Next Page
Previous Page
Next Page
Recommended Information
Crushing pump - pigment crushing test
2023-11-30
Precautions for operating an emulsifier
2023-11-14
Delivery of hygienic rice grinder
2023-11-07
Polyacrylamide mixed homogenization test
2023-10-23
Contact Information
No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province
Focus on us
Mobile Website
Copyright©2023 Nantong Fleck Fluid Equipment CO., LTD.
Powered by 300.cn | SEO | Business License