Welcome to Nantong Fleck Fluid Equipment CO., LTD.!
The main points of the use of emulsifying machine, dispersing emulsifying machine manufacturers for you to dispel doubts
dispersion emulsifying machineManufacturers believe that the emulsifier is a very broad word, including many categories and specifications, or use occasions. In different industrial mixing fields, the demand for emulsifiers is very different. The emulsifying machine includes normal pressure high shear emulsifying machine, vacuum negative pressure homogeneous emulsifying machine, internal and external circulation emulsifying machine, lifting high shear emulsifying machine, etc. Depending on the industrial occasions used, the type and structure of the emulsifier are also very different.
dispersion emulsifying machineManufacturers believe that the vacuum emulsifier is a complex three types of fluid mixing machinery and equipment. In the production of the emulsifying machine application industry, the emulsifying machine equipment is the key equipment in the production process, so the quality and performance of the equipment are very concerned about, but the safety and environmental protection of the vacuum emulsifying machine is also very important for the sustainable and healthy development of the enterprise production.
dispersion emulsifying machineThe manufacturer believes that compared with the traditional closed emulsifying machine equipment, the hydraulic lifting system of the vacuum emulsifying machine greatly reduces the workload of the operator, greatly improves the efficiency, and makes cleaning more convenient. At the same time, the sense of technology and convenience brought by automatic lifting can bring a good operating experience.
1. The cover, beam, motor and stirring device of the homogeneous emulsifying tank can be lifted and lowered, which is convenient for the maintenance and cleaning of the stirring device. The homogeneous emulsifying tank can be turned over and dumped after being lifted and lowered.
2. The manufacturer believes that the upper cover of the emulsifier is lifted by a set of hydraulic devices, which are mainly composed of hydraulic oil tank, hydraulic pump, pressure gauge, motor, solenoid valve, pressure regulating valve, etc.
3. The lifting action of the emulsifying machine can cover is flexible and stable, without jamming and crawling; the rising and falling speed of the piston can be controlled by adjusting the total hydraulic pressure and the fine-tuning switch of the solenoid valve.
4. Emulsion machine hydraulic piston stability is good, the piston down too fast when the automatic closure of the safety valve, can be very good to protect the safety of operators and equipment.
The manufacturer believes that the hydraulic system of the emulsifier is equipped with a safety limit system, which can keep the upper cover in any required position.
6. The hydraulic system of the emulsifier can fully support the gravity that must be borne, and can be stable for 24 hours or more.
dispersion emulsifying machineManufacturers believe that the vacuum emulsifier homogeneous cutting and scraper stirring: after feeding(Water can be used instead during debugging), turn on the corresponding control switch to control the operation of the homogenizer and scraper stirring. The vacuum emulsifier should keep the homogenizer clean. If the material is stopped or needs to be replaced, the parts of the homogenizer in contact with the working fluid should be cleaned as required, especially the cutting sleeve of the head cutting wheel, the sliding bearing and the shaft sleeve in the homogenizing shaft sleeve. After cleaning and reassembly, the manual impeller should be free from blockage. After the two flanges of the pot body and the pot cover are relatively fixed, the motor of the inching homogenizer should turn correctly and can only be started when there are no other abnormalities. During debugging, the homogenizer shall be operated after inching and stirring for trial operation, and then the homogenizer shall be operated after confirmation.
Previous Page
Recommended Information
Crushing pump - pigment crushing test
2023-11-30
Precautions for operating an emulsifier
2023-11-14
Delivery of hygienic rice grinder
2023-11-07
Polyacrylamide mixed homogenization test
2023-10-23
Contact Information
No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province
Focus on us
Mobile Website
Copyright©2023 Nantong Fleck Fluid Equipment CO., LTD.
Powered by 300.cn | SEO | Business License