Welcome to Nantong Fleck Fluid Equipment CO., LTD.!
Emulsion machine manufacturers: Emulsion machine use and maintenance precautions
dispersion emulsifying machineIt is a device that efficiently, quickly, and uniformly enters one or more phases into another immiscible continuous phase. The main advantage of the emulsifying machine is that it is upright and the material can enter completely. 100 of the materials are cut by dispersion without dead corners. Continuous mixing and dispersion method; Low noise and stable operation; It meets the cleaning standards of CIP and SIP. Suitable for food, pharmaceutical and chemical industries. Below we andEmulsifying machine manufacturersLet's learn about the use and maintenance of dispersed emulsifying machine. What are the precautions?
In the process of using the equipment, the user must regularly send the instruments to the relevant departments for verification, so as to ensure the safety and stable operation of the equipment.
2, emulsifying machine manufacturers: dispersion of emulsifying machine electrical equipment maintenance. In order to ensure that the equipment and electronic control system are clean and hygienic, do a good job in moisture-proof, anti-corrosion, and do a good job in ventilation, dust removal and other heat dissipation. Otherwise, it may have a great impact on the electrical equipment, and may even burn the electrical equipment.
3. Emulsifying machine manufacturer: dispersing heating system of emulsifying machine. Safety valves should be checked regularly to prevent rusting, jamming and failure of valves. The drain valve should be checked regularly to prevent blockage of impurities.
4. Emulsifying machine manufacturer: dispersing emulsifying machine sealing system. There are many seals in the emulsifier. The dynamic and static rings of the mechanical seal should be replaced regularly. The cooling system of the double-sided mechanical seal should be checked regularly to avoid damage to the mechanical seal due to cooling. The skeleton seal shall be made of suitable materials according to the material characteristics and shall be replaced regularly according to the period of use.
5. Emulsifying machine manufacturer: vacuum system of dispersing emulsifying machine. In particular, the water ring vacuum pump sometimes burns the motor due to rust or debris. Therefore, in the daily maintenance process, it is necessary to check whether there is a blockage, and the water ring system should be smooth. During use, if the vacuum pump is blocked, the vacuum pump should be stopped immediately and the vacuum pump should be restarted.
6, emulsifying machine manufacturers: do a good job of dispersing emulsifying machine lubrication. Regularly replace the lubricating grease of the motor and reducer according to the instruction manual. If you use it frequently, you should check the viscosity and acidity of the grease in advance, and replace the lubricating oil in advance.
7. During the operation of the dispersing emulsifier, if there is abnormal noise or other faults, please stop the inspection immediately and troubleshoot.
The above isEmulsifying machine manufacturersThe introduction of the relevant maintenance precautions, hoping to help you better use and maintenanceEmulsion machine.
Recommended Information
Crushing pump - pigment crushing test
2023-11-30
Precautions for operating an emulsifier
2023-11-14
Delivery of hygienic rice grinder
2023-11-07
Polyacrylamide mixed homogenization test
2023-10-23
Contact Information
No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province
Focus on us
Mobile Website
Copyright©2023 Nantong Fleck Fluid Equipment CO., LTD.
Powered by 300.cn | SEO | Business License