Welcome to Nantong Fleck Fluid Equipment CO., LTD.!

Technology R & D

Home

Use and Maintenance of Horizontal Emulsion Machine

horizontal emulsifying machineIt has a wide range of applications and has the functions of rapid and uniform emulsification, heating, cooling, vacuum degassing and discharge. Homogeneous emulsification effect is good, the production hygiene conditions are good, the thermal efficiency is high, the cleaning is thorough and convenient, the electrical control is reliable, the operation is stable, the operation and maintenance are convenient, and the labor intensity is low. It is an ideal equipment for the production of ointments, creams, honey and cosmetics. In order to maintain in the production processhorizontal emulsifying machineThe work efficiency and product quality, and to extend the service life of the emulsifier, need to be used and maintained in a standardized manner. Please note the following:

1, do well.horizontal emulsifying machineDaily cleaning and sanitation work.
2. Maintenance of electrical equipment: It is necessary to ensure that the equipment and electrical control system are clean, hygienic, moisture-proof, and anti-corrosion, and the inverter must be well ventilated and dust-removed. If this aspect is not done well, it may have a huge impact on electrical equipment and even burn out electrical equipment.
3. Heating system: The safety valve should be checked regularly to prevent the safety valve from rusting and malfunctioning. Trap valves should be checked regularly to prevent clogging of debris.
4. Vacuum system: Especially the water ring vacuum pump, the motor may burn out due to rust or debris, and the rotor may be blocked during use. Therefore, during routine maintenance, please check whether the rotor is blocked. The water ring system must be kept unobstructed. If there is a blockage during use, please stop the vacuum pump immediately and start it again after cleaning.
5. Sealing system:horizontal emulsifying machineThere are many seals, and the dynamic and static rings of mechanical seals should be replaced regularly.
6. Lubrication: The motor and reducer should be replaced regularly according to the manual. If you use it frequently, please check the viscosity and acidity of the lubricating oil in advance, and replace the lubricating oil in advance.
7. When using the equipment, the user must regularly send the instrument to the relevant department for verification to ensure the safety of the equipment.
8, ifhorizontal emulsifying machineIf there is an abnormal sound or other malfunction during operation, it should be turned off immediately for inspection, and then run again after troubleshooting.