Welcome to Nantong Fleck Fluid Equipment CO., LTD.!

Technology R & D

Home

High Shear Homogenizing Pump Shipment

The high-shear homogenizer pump purchased by a customer in Shandong has been manufactured and shipped out of the factory after passing the test.

Main functions of high shear homogenizing pump:

High shear homogenization pump is mainly used to crush the crystallization in the pipeline fluid, agglomerates, agglomerates, sticky block, filter cake and other types of fragile particles grinding grinding refinement, more energy efficient to improve the material reaction process and effectively ensure the next pump valve flow capacity. In the grinding process, the fluid liquid material must go through a shearing zone, a three-stage grinding zone, and ten channels to disperse and refine, and finally extrude from about 0.3-0.6mm in the tooth groove channel to form a high-speed, high-pressure, high-frequency atomization phenomenon, thus more effectively improving the crushing, dispersing and emulsifying ability of the particles.

high shear homogenizer pump working principle:

The high-shear homogenizing pump directly enters the high-shear crushing zone from the inlet under the high-speed rotation of the motor. Through a special crushing device, some large powder, sticky blocks, agglomerates and other large and small particles in the fluid are rapidly crushed, and then sucked into the shearing crushing zone. In a very narrow working corridor, the rotor blade and the stator blade are cut at relatively high speed, resulting in strong friction and grinding crushing. Under the action of mechanical movement and centrifugal force, the crushed and refined materials are re-pressed into the fine grinding zone for grinding and crushing. The fine grinding is divided into three stages. The more outward the first stage is extended, the higher the precision of the grinding plate, the smaller the tooth pitch, the longer the linear velocity, the finer the material is ground, and the fluid gradually extends to the radial curve. The direction speed of each primary fluid changes instantly, and is subjected to tens of millions of times per minute of high-speed shearing, strong friction, extrusion grinding, particle crushing, etc. After passing through tens of millions of times of high-speed shearing, grinding and crushing in the three fine grinding zones, the effects of liquid molecular chain breaking, particle crushing, liquid particle tearing and the like are produced, so that the materials can fully achieve the purposes of dispersion, crushing, emulsification, homogenization and refinement. The minimum fineness of the liquid material can reach 0.5 μm, and the ordinary conveying head can reach 3-6 meters.