Welcome to Nantong Fleck Fluid Equipment CO., LTD.!
Some common sense of high shear emulsifying machine
High shear emulsifying machineThe manufacturer believes that the operation of the emulsifying machine is to connect the engine with the working head of the homogenizing machine to drive the homogenizing head to rotate at high speed, so that the materials in the emulsifying tank can be sheared, refined, dispersed, impacted and emulsified at high speed to form a stable multi-phase combination. Therefore, the emulsification effect has a great influence on these key parts.
High shear emulsifying machineManufacturers consider a mechanical seal to be just one way of containing a fluid in a container (typically a pump, mixer, etc.) where a rotating shaft passes through a stationary housing, or occasionally the housing rotates about the shaft. The emulsifier is a complex machine that is precisely assembled from parts of different structures. The connection between the different part structures is particularly important and is a key factor in highlighting the quality of the emulsifier. The seal in the emulsifier is an important component. It is a device to solve the seal between the central shaft and the body. The mechanical seal is composed of at least one pair of end faces perpendicular to the rotating shaft, which are kept in contact and relatively slide under the cooperation of the fluid pressure, the elastic force (or magnetic force) of the compensation mechanism and the auxiliary seal. Commonly used in pumps, compressors, reaction stirred tanks and other rotating fluid machinery. It is also used to seal gear boxes, valves, rotary joints, ship stern shafts, etc. Therefore, the mechanical seal is a general shaft seal device.
High shear emulsifying machine manufacturers believe that in biopharmaceutical, food, daily chemical, new materials and other industries, research and development is the driving force for these industries to maintain their core competitiveness. In the research and development of these industries, small high shear emulsifiers are commonly used mixing, stirring and heating equipment in the laboratory. Under the combined action of the strong centrifugal extrusion, shearing and other mechanical forces of the laboratory vacuum emulsifier and the mature process formula, the experimental materials are evenly and finely mixed, dispersed, homogenized, and emulsified to achieve satisfactory finished products.
High shear emulsifying machinePrecautions for use:
1. Laboratory high-shear emulsifiers are commonly used in high-speed homogeneous shear heads, using high-speed motors, and the speed is generally high. For example, the rotating speed of the sixth generation of new laboratory high-shear emulsifying machine in Yikai has reached 6000 r/min. This high-speed working head must not be opened when the pan is empty in the pan body, so as not to affect the sealing degree of the mechanical seal due to local heat.
2. In terms of power consumption, the ground wire is reliably grounded to ensure the safety of power consumption.
3. Turn the shaft end of the homogenizer to the right. Every time the motor is connected or it has not been restarted for a long time, it should be inched for trial operation. After confirmation, the homogenizer will be officially operated.
4. Before each mixing start, you should move slowly to check whether there is any abnormality in the mixing and scraping of the wall. If so, it should be eliminated immediately.
5. Before using the vacuuming function, be sure to carefully check whether the pot and lid are flat, and whether the pot mouth and lid are in good condition. Tightly covered and reliably sealed.
6. Before the vacuum pump is turned off, the ball valve in front of the vacuum pump should be closed.
7. The vacuum pump can be started with the homogenization tank sealed. If there is a special need to open the air start pump, the operation time should not exceed 3 minutes.
Previous Page
Recommended Information
Crushing pump - pigment crushing test
2023-11-30
Precautions for operating an emulsifier
2023-11-14
Delivery of hygienic rice grinder
2023-11-07
Polyacrylamide mixed homogenization test
2023-10-23
Contact Information
No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province
Focus on us
Mobile Website
Copyright©2023 Nantong Fleck Fluid Equipment CO., LTD.
Powered by 300.cn | SEO | Business License