Welcome to Nantong Fleck Fluid Equipment CO., LTD.!
Matters needing attention in the use of dispersing emulsifying machine
dispersion emulsifying machineThe material is sheared, dispersed and impacted by the high-speed rotation of the homogenizing head connected to the engine. In this way, the material will become more delicate and the oil and water will merge together. Widely used in cosmetics, shower gel, sunscreen and many other need to use dispersion emulsifying machine cream products. sauce, juice, etc. in the food industry. Ointments in the pharmaceutical industry. The dispersing emulsifying machine will be used in petrochemical industry, paint, coating, ink, etc.
dispersion emulsifying machineImportant safety precautions when using
1 Each time the user starts the dispersing emulsifier, he should first open the bearing water jacket to circulate water, and dry operation is strictly prohibited.
2 When the shift starts, it should be inched firstdispersion emulsifying machine, Restart to prevent the motor from burning due to excessive starting load. The running time of the jog test shall not exceed 20 seconds.
3 During operation, it is strictly forbidden to cut off the water at the bearing water jacket and jacket.
4 During the working process, it is strictly forbidden to break the materials of the dispersing emulsifier to prevent the latex from staying and heating up and prevent accidents.
5 After the end of production, the dispersing emulsifier must be rinsed with water, and it is strictly forbidden to start the dispersing emulsifier with load.
6 Disassemble or repair the dispersion emulsifying machine, must clean the material in the emulsifying chamber.
7 In order to ensure production safety and avoid human misoperation, in the operation and control of continuous emulsification, the equipment must have safety measures such as automatic alarm and automatic shutdown of process parameters such as overtemperature, overpressure, cut-off, water cut-off, abnormal current fluctuation, etc.
LUBRICATION, MAINTENANCE AND REPAIR:
1,dispersion emulsifying machineAfter strict dynamic balance inspection, water jacket pressure inspection and machine operation test when leaving the factory. However, after long-distance transportation, the user should do the following inspections before use:(1) check whether the bolts are loose and the bearings are greased. (2) Rotate the coupling by hand to see if there is any jam, and then install and debug it and put it into use after confirming that there is no difference.
2. The bearings of the dispersing emulsifier should be lubricated frequently, and grease should be added every half month. Lithium grease or molybdenum disulfide grease is recommended.
3. The user should conduct a comprehensive maintenance of the equipment every six months after continuous operation to check whether the bearings, stators, rotors and connecting parts are in good condition.
4. During the work process, the equipment itself must be shut down when there is any bad phenomenon, and the equipment can be turned on after diagnosis and maintenance. Work with illness is prohibited.
Previous Page
Previous Page
Recommended Information
Crushing pump - pigment crushing test
2023-11-30
Precautions for operating an emulsifier
2023-11-14
Delivery of hygienic rice grinder
2023-11-07
Polyacrylamide mixed homogenization test
2023-10-23
Contact Information
No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province
Focus on us
Mobile Website
Copyright©2023 Nantong Fleck Fluid Equipment CO., LTD.
Powered by 300.cn | SEO | Business License