Welcome to Nantong Fleck Fluid Equipment CO., LTD.!
Emulsion machine: high shear emulsifying machine use and maintenance matters needing attention
High shear emulsifying machineIt is very important to do a good job in daily cleaning. Let's take a look at it.
1. In the process of using the equipment, the user must regularly send the instrument to the relevant department for verification to ensure the safety of the high-shear emulsifying machine equipment.
2. Maintenance of electrical equipment of high-shear emulsifying machine: ensure that the equipment and electrical control system are clean and sanitary, do a good job of moisture prevention and corrosion prevention, and do a good job of ventilation, dust removal and other heat dissipation measures of the inverter. If this aspect is not done well, it may have a great impact on the electrical equipment, or even burn the electrical equipment. (Note: Before performing electrical maintenance, please turn off the main switch, lock the electrical box with a padlock, and carry out safety marks and safety protection).
3. Heating system of high-shear emulsifying machine: The safety valve should be checked regularly to prevent rust, jam and failure of the safety valve. The drain valve should be checked regularly to prevent blockage of impurities.
4, high shear emulsifier sealing system: there are many seals in the emulsifier. The dynamic ring and static ring of the mechanical seal should be replaced regularly. The cycle depends on the frequent use of the equipment. The cooling system of the double-sided mechanical seal should be checked regularly to avoid damage to the mechanical seal due to cooling failure. The frame seals should be made of suitable materials according to the material characteristics and replaced regularly during use according to the maintenance manual.
5. High-shear emulsifying machine vacuum system: The vacuum system, especially the water ring vacuum pump, sometimes burns the motor due to rust or debris. Therefore, please check whether it is blocked during daily maintenance, and the water ring system should be unobstructed. During use, if the vacuum pump is blocked, please stop the vacuum pump immediately and restart it after cleaning the vacuum pump.
6. Lubrication of high-shear emulsifying machine: The motor and reducer should be replaced with grease regularly according to the instruction manual. If you use it frequently, please check the viscosity and acidity of the grease in advance, and replace the lubricating oil in advance.
7, inHigh shear emulsifying machineDuring operation, if there is an abnormal sound or other malfunction, it should be turned off immediately for inspection, and the operation can only be performed after the malfunction is eliminated.
Recommended Information
Crushing pump - pigment crushing test
2023-11-30
Precautions for operating an emulsifier
2023-11-14
Delivery of hygienic rice grinder
2023-11-07
Polyacrylamide mixed homogenization test
2023-10-23
Contact Information
No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province
Focus on us
Mobile Website
Copyright©2023 Nantong Fleck Fluid Equipment CO., LTD.
Powered by 300.cn | SEO | Business License