Welcome to Nantong Fleck Fluid Equipment CO., LTD.!

Technology R & D

Home

The principle of chemical emulsifying machine structure and the use of matters needing attention

　　chemical emulsifying machineThe use of vortex mixing, shear, ultrasonic and other technical means to break and refine water micelles, but also can break and refine diesel and mix them evenly to form an emulsified structure. Due to the viscosity of the fluid, the force generated by the mutual movement of the fluid layers is called shear force. Due to high-speed motion, shear forces create turbulence in the fluid layer, which disrupts the liquid interface. In practical applications, colloid mills, shear heads, high-pressure homogenization and jets are all shear forces formed by high-speed motion.

The shearing head is composed of a rotor and a stator. The rotor has strong kinetic energy due to its extremely high linear speed and high-frequency mechanical effects, so that the material is subjected to shearing, centrifugal extrusion, and liquid in the precise gap between the rotor and the stator. The combined effects of layer friction, impact tearing and turbulence can achieve the effects of dispersion, grinding and emulsification. vacuum homogenizationchemical emulsifying machineHas a huge potential market, high efficiency, high degree of modernization, strong function. As technology continues to advance, it will continue to mature. Vacuum homogenization chemical emulsifying machine will continue to advance in the development, continue to accelerate the pace, and achieve greater success. Professional machinery has an advantage in the competition, and it is unrealistic to have no technology.

So, what should we pay attention to when using a chemical emulsifying machine? The following Nantong Flake Fluid Equipment Co., Ltd. will give you a detailed introduction.

First, adjust the time relay to the required working time, and press the homogenizer start button.

　　chemical emulsifying machineHomogeneous cutting and scraper stirring: After feeding (water can be used instead during debugging), turn on the corresponding control switches to control the operation of the homogenizer and scraper stirring.

The homogeneous cutting head cannot run in the empty tank state because its speed is extremely high, so as not to affect the sealing degree after local heating.

The homogenizer of the chemical emulsifying machine is inverted from top to bottom. After the motor is connected or when it is not used for a long time, it should be tested and rotated in the jog, the stirring frame is reversed from top to bottom, and the stirring blade rotates clockwise from top to bottom.

Before starting the mixing, you should also use inching to check whether there is any abnormality in the wall scraping during the mixing process. If there is any abnormality, it should be eliminated immediately.

attention to keepchemical emulsifying machineCleaning of the homogenizer. If the use is stopped or the material needs to be replaced, the parts of the homogenizer in contact with the working fluid should be cleaned as needed, especially the cutting sleeve of the cutting wheel head, the sliding bearing and the shaft sleeve in the homogenizing shaft sleeve. After cleaning and reassembly, the manually turned impeller should be free of blockage. After the two flanges of the pot body and the pot cover are relatively fixed, the motor of the jog homogenizer can rotate accurately before starting to work without any other abnormalities.

Today, we introduced the precautions when using the chemical emulsifying machine, and hope to be helpful to everyone. For more information, please contact the chemical emulsifying machine manufacturer.

Ultrafine grinding emulsifying machine

Emulsion machine

Ultrafine grinding emulsifying machine

Emulsion machine

Recommended Information

Maintenance and upkeep of high shear emulsifier

2023-12-04

Grinding machine - block polyethylene crushing test

2023-11-30

Crushing pump - pigment crushing test

2023-11-30

Zhejiang New Energy Company Visits for Inspection