Welcome to Nantong Fleck Fluid Equipment CO., LTD.!
Emulsion machine manufacturers: pipeline type emulsifying machine performance advantage introduction
Emulsion by mass fraction of 2% of the emulsifying fat and 98% of the soft water emulsifying machine uniform stirring. Let's take a lookpipeline type emulsifying machineperformance advantages.
Pipeline typeEmulsion machineShould have good anti-corrosion and anti-rust performance, and have a certain lubrication function. Generally speaking, there is a special emulsifying machine in the pump accumulator station.
At present, it is easy to use a pump to circulate and stir. Put the emulsified fat and soft water into the emulsifying machine in proportion, close the gate valve, start the centrifugal pump, and circulate the mixed solution to achieve the purpose of stirring. After the emulsifier is stirred evenly, close the gate valve, open the gate valve, and pump the prepared emulsion into the water tank for use. It is also possible to stir by introducing compressed air.
pipeline type emulsifying machineRadial imbalance forces. When working, bear the radial hydraulic pressure of gears and bearings. The right side of the emulsifier is an oil suction chamber, and the left side is an oil pressure chamber.
There is hydraulic pressure in the oil pressure chamber acting on the gear, and the oil leaking along the top of the tooth has different pressures, that is, the radial imbalance force on the gear and the bearing. The higher the hydraulic pressure, the greater the imbalance force. As a result, the wear of the bearing is accelerated, the life of the bearing is reduced, and even the shaft is deformed, resulting in friction between the tooth tip and the inner wall of the emulsion.
In order to solve the problem of radial force imbalance, in some pipelineEmulsion machineThe pressure balance groove is used to eliminate the radial force imbalance, but this will increase the leakage and reduce the volumetric efficiency. another kindpipeline type emulsifying machineBy reducing the oil pressure cavity to reduce the action area of the tooth top hydraulic pressure, in order to reduce the radial imbalance force, so the pipeline type emulsifying machine oil pressure port aperture than the suction port aperture is small.
This is whatpipeline type emulsifying machineperformance advantages. I hope this helps everyone. For more information, please contact the pipelineEmulsifying machine manufacturers.
Previous Page
Previous Page
Recommended Information
Crushing pump - pigment crushing test
2023-11-30
Precautions for operating an emulsifier
2023-11-14
Delivery of hygienic rice grinder
2023-11-07
Polyacrylamide mixed homogenization test
2023-10-23
Contact Information
No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province
Focus on us
Mobile Website
Copyright©2023 Nantong Fleck Fluid Equipment CO., LTD.
Powered by 300.cn | SEO | Business License