Experimental special emulsifier_Nantong Fleck Fluid Equipment CO., LTD.

At present, many scientific research institutions, colleges and universities, state-owned enterprises and state-owned enterprises in the laboratory do not have the multi-functional wet mixing, homogenization, dispersing and emulsification, crushing and grinding all-in-one equipment, often affecting the progress of the project and the test results. The general area of the experimental room is relatively small. Different media are used for different media during the test, but too many test equipments are difficult to maintain and maintain. How many tech workers want a comminuted homogeneous emulsification device with low investment, full functionality, and small footprint. To this end, After several years of efforts, Nantong Fleck Research Group has finally invented and created a new type of equipment with multiple modules to solve scientific research. The urgent need of workers.

The mixing and shearing three-in-one experimental equipment configuration is as follows:：

Main unit: 1 set of 2.2kw ordinary motor, 1 bearing block, 1 pump casing, 3 modules, modules can be used interchangeably, 1 8 liter bucket and circulating pipeline valve drain valve.

Can be equipped with: small reactor (20-50 liters) and electrical control box. The mixer in the reactor is a normal 0.75-1.5kw motor (see the high-shear vertical emulsifier for details)

Can also be equipped with: variable frequency motor, single-phase motor, explosion-proof motor, electrical control box

The three modules are：

One of the modules: mixed homogenizer head module（See the detailsHigh shear emulsifier）

Module 2: Cutting Microcomputer Head Module（See the detailsHigh shear micromachine）

Module 3: Crushing colloid grinding head module（See the detailsHigh shear colloid mill）

Corresponding parameter set not found, please add it in property template of background

Laboratory emulsifier technical parameters:

Model	Grinding disc adjustable distance	Bucket volume	Motor Power	Rotating speed r/min	Types
SHY-25A	0.01-2mm	5-10L	2.2kw	2950	Vertical
SHY-25B	0.01-2mm	5-10L	2.2kw	2950	Horizontal

One host is equipped with multiple modules (grinding colloid grinding head module, shearing micro-head module, mixing homogenizing head module), users can use interchangeable according to requirements

The mixing and shearing three-in-one experimental equipment is prepared as follows:

　　Main unit: 1 set of 2.2kw ordinary motor, 1 bearing housing, 1 pump casing, 3 modules, modules can be used interchangeably, 1 8 liter bucket and circulating pipeline valve drain valve.

　　Can be equipped with: small reactor (20-50 liters) and electrical control box. The mixer in the reactor is a normal 0.75-1.5kw motor (see the high-shear vertical emulsifier for details)

　　Can also be equipped with: variable frequency motor, single-phase motor, explosion-proof motor, electrical control box

The three modules are:

　　One of the modules: mixed homogenizer head module (see the high shear emulsifier for details)

　　Module 2: Shear micro-head module (see the high-shear micro-machine for details)

　　Module 3: Crushing colloid grinding head module (for details, see High Shear Colloid Mill)

Accessories: Equipment selection parameters and technical requirements (downloadable)

　First, the technical parameters of your company's materials:

Material medium

Processing capacity(m³/h)

Liquid category

□Water-based,　□Oily,　□Solvent

Solid category

□Agglomerate,　□Crystals,　□Primary particle

Liquid to solid ratio(%)

Viscosity Pa.s

Material flow

□Very good (water),　□可以，　□difference,　□Very poor

Feed contains

Large particles mm,Take up %

Medium particle mm,Take up %

Small particles mm,Take up %

Solid particles

(□fragile, □Not fragile, □Viscous)

Discharge granule μm

Head m

temperature ℃

Remarks:

　Second, your company's requirements for equipment:

　1. Material contact part material

□stainless steel 304，　□stainless steel 316L，　□Duplex steel 2205，　□TA2，　□HastelloyC276

　2, rotating stator material

□stainless steel 304，　□stainless steel 316L，　□Duplex steel 2205，　□TA2，　□Hastelloy C276，

□Wear-resistant steel NM500，　□Wear-resistant steel 38CrMoAl，　□Tungsten carbide treatment,　□Emery treatment

　3, sealed

□Ordinary single-sided mechanical seal,　□Ordinary double-sided mechanical seal,　□Custom double-sided mechanical seal

O-ring configuration

□Ding O-ring,　□Fluoro rubber O-ring,　□Fluorine-containing O-ring,　□Perfluoroether O-ring

Material contact surface

□Tungsten carbide-silicon carbide,　□Tungsten carbide-tungsten carbide,　□Silicon carbide-silicon carbide

　4, the motor

□Ordinary motor,　□Inverter motor,　□Ordinary explosion-proof motor,　□Explosion-proof inverter motor,　□Dust explosion-proof motor

□Class 2 energy efficient motor,　□Marine motor,　□Waterproof motor

□Self-contained control box

□With control box

　Third, the corresponding device model:

Full name of the equipment

Model

Processing capacitym³/h)

Motor Power(kw)

Amount

Remarks

other

Fill in the unit:　　　　　　　　　　Fill in the person:　　　　　　　　　　phone:

Daily chemical industry: AES、LAS、AOS、MES、K12、Glycerin, sorbitol, fatty alcohol, shower gel, skin cream, shampoo, hand soap, toothpaste, soap, detergent powder, etc.

Fine Chemicals:Dyes, pigments, various pastes, chemical additives, adhesives, 107 glue, silicone oil, leather oil, emulsion explosives, various colloidal materials.

Food:Chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated juice, jam, ice cream, milk, yeast mud, meat, jelly, condiments, vinasse, soy protein, flour, etc.

Paper production:Polyacrylamide (PAM), calcium carbonate, starch paste, carboxylated butylbenzene/propylbenzene latex, rosin, rosin gum, pulp, filler, dry strength: agent, wet strength agent, sizing agent, retention and drainage aid, elimination Foaming, coating, water treatment chemicals, etc.

Chemical fiber:Viscose porridge, PVA, vinylon pulp, acrylic pulp, amine pulp, polyester chips, polyester, polypropylene, rayon, functional fiber, etc.

Medical medicine:Various ointments, extracts, drug lotions, pill pastes, syrups, health products, pharmaceuticals, etc.

Coating:Paints, coatings, inks, insulating varnishes, resins, auxiliaries, organic solvents, etc.

暂未实现,敬请期待

86-513-83351692

Experimental special emulsifier

Products