Two-stage dispersing emulsifier_Nantong Fleck Fluid Equipment CO., LTD.

　The two-stage emulsifier is a high-tech advanced equipment composed of a high-shear homogenizer and a fine emulsifier. Mainly used for heavy oil emulsification, oil slag emulsification, asphalt emulsification, rubber asphalt, modified asphalt emulsification. It has the function of mixing and homogenization, the performance of dispersing emulsification, and the powerful and diversified grinding and grinding function. From suction to mixing, from shearing to comminution, from every manufacturing process to every piece of equipment it is scientific, advanced and creative. With its very strong production capacity and advanced performance beyond the times, it truly realizes multi-functional advanced equipment integrating dispersing emulsification, homogenizing mixing, pulverizing and conveying, etc. It is fundamentally solved with superior performance and super mechanism. It has technical problems that cannot be solved by ordinary emulsifier, ordinary colloid mill and general equipment, and it can also be tailored according to different media, different granules, different viscosities and different production process requirements. Create the most advanced equipment for your model and solve your worries.

Corresponding parameter set not found, please add it in property template of background

Model	Grinding disc adjustable distance mm	Processing capacity m³/h	Motor Power kw	Rotating speed r/min	Import and export size mm	Types
RHJ-25SJ	0.01-2	0.1-0.5	3-4	2950	40-25	Experiment apparatus
RHJ-32SJ	0.01-2	0.8-2	7.5-11	2950	50/40	Horizontal
RHJ-50SJ	0.01-2	1-5	11-18	2950	65/50	Horizontal
RHJ-65SJ	0.01-2	4-10	15-22	2950	80/65	Horizontal
RHJ-80SJ	0.01-2	6-15	18-30	2950	100/80	Horizontal
RHJ-100SJ	0.01-2	10-20	30-37	2950	125/100	Horizontal
RHJ-125SJ	0.01-2	15-30	37-45	2950	150/125	Horizontal
RHJ-150SJ	0.01-2	20-40	45-55	2950	175/150	Horizontal
RHJ-175SJ	0.01-2	30-60	55-75	2950	200/175	Horizontal

Note: The flow range in the table is water as the parameter. When the treatment volume is large, please add the matching pump delivery at the outlet.

　　2 pump port pressure ≤ 0.2MPa, import and export is recommended to install a length of hose, or metal bellows to prevent deformation of the head.

　　3 The motor in the table is an ordinary motor, and the explosion-proof motor can be selected.

　　4 According to the viscosity, the motor power can be adjusted as appropriate.

　　5 Do not allow hard materials to enter the working chamber, if necessary, add filters at the inlet.

　　6 can be formulated with insulation cooling jacket.

1.具有强大的混合均质、分散乳化能力和越强的粉碎研磨、破碎输送功能

2.所以零件都采用锻造精加工而成，绝无铸件

3.电机采用普通型、防爆型等优质电机、确保长期使用无质量问题

4.本设备静音设计，无振动，无噪音，动平衡效果好，安装方便

5.转定子可进行渗氮处理或渗碳化钨处理，增强表面的硬度，达到耐腐耐磨

6.有强大的输送能力，扬程可达20米，连续作业和间隙作业不影响设备寿命

7.间隙可以调节，调节距离为0.01~2mm最小细化度可达0.5µm

8.采用机械水冷耐高温双面合金密封，只要有密封冷却液溢出空转没问题

双级分散乳化机主要功能

　　双级分散乳化机是由吸料盘将物料混合物吸入一级混合区域对颗粒、液粒等进行初步的破碎和混合，然后压入普通的剪切区由于齿槽的宽度、角度的大小以及齿条的距离等各种原因，第一级剪切机只能起高速混合均质和大颗粒的粉碎作用，所以富莱克FLECK公司利用独有先进设计理念专门开发一种FLK-T型第二级为剪切式胶体磨。

　　双级分散乳化机是针对在流体中的尚未分散的分散相颗粒以及不溶性液滴，必须采用有着越强性能的粉碎胶体磨来完成，让这些小颗粒重新进入更精密，更狭窄，更先进的多层次的凹凸迷宫中式粉碎区域内进行分散研磨，并且要承受凹凸磨几千刀片相对高速运转时形成的高频摩擦、剧烈震荡以及湍流，从而产生强大的冲出超声波，使颗粒破碎、液粒撕碎等工艺要求，从而使物料颗粒细化度越磨越细、分散乳化效果越磨越好。产品稳定性越好，储存时间越长。

双级分散乳化机主要结构

　　双级分散乳化机是一种双级剪切式胶体磨，是由于乳化机、粉碎机、胶体磨等组合而成的一种高科技先进设备。

　　双级分散乳化机第一级是普通剪切机结构，转定子是由四、六个剪切层百个齿型刀片组成，起到混合、剪切、均质、乳化作用。

　　双级分散乳化机第二级是剪切式胶体磨结构，转定子是有三大区域十道剪切研磨小区以及上千个大小不一，凹凸不平、犬牙交错的齿槽组成，起到高速剪切、强烈摩擦、颗粒撕碎等一系列复杂而强劲的机械运动及多元化高频率剪切研磨之后，使液滴分子链断裂、颗粒破碎、液粒撕碎等工艺要求，最小细度可达0.5µm左右。

Accessories: Equipment selection parameters and technical requirements (downloadable)

　First, the technical parameters of your company's materials:

Material medium

Processing capacity(m³/h)

Liquid category

□Water-based,　□Oily,　□Solvent

Solid category

□Agglomerate,　□Crystals,　□Primary particle

Liquid to solid ratio(%)

Viscosity Pa.s

Material flow

□Very good (water),　□可以，　□difference,　□Very poor

Feed contains

Large particles mm,Take up %

Medium particle mm,Take up %

Small particles mm,Take up %

Solid particles

(□fragile, □Not fragile, □Viscous)

Discharge granule μm

Head m

temperature ℃

Remarks:

　Second, your company's requirements for equipment:

　1. Material contact part material

□stainless steel 304，　□stainless steel 316L，　□Duplex steel 2205，　□TA2，　□HastelloyC276

　2, rotating stator material

□stainless steel 304，　□stainless steel 316L，　□Duplex steel 2205，　□TA2，　□Hastelloy C276，

□Wear-resistant steel NM500，　□Wear-resistant steel 38CrMoAl，　□Tungsten carbide treatment,　□Emery treatment

　3, sealed

□Ordinary single-sided mechanical seal,　□Ordinary double-sided mechanical seal,　□Custom double-sided mechanical seal

O-ring configuration

□Ding O-ring,　□Fluoro rubber O-ring,　□Fluorine-containing O-ring,　□Perfluoroether O-ring

Material contact surface

□Tungsten carbide-silicon carbide,　□Tungsten carbide-tungsten carbide,　□Silicon carbide-silicon carbide

　4, the motor

□Ordinary motor,　□Inverter motor,　□Ordinary explosion-proof motor,　□Explosion-proof inverter motor,　□Dust explosion-proof motor

□Class 2 energy efficient motor,　□Marine motor,　□Waterproof motor

□Self-contained control box

□With control box

　Third, the corresponding device model:

Full name of the equipment

Model

Processing capacitym³/h)

Motor Power(kw)

Amount

Remarks

other

Fill in the unit:　　　　　　　　　　Fill in the person:　　　　　　　　　　phone:

日用化工： AES、LAS、AOS、MES、K12、甘油、山梨醇、脂肪醇、沐浴露、护肤霜、洗发液、洗手液、牙膏、肥皂、洗衣粉料浆等。

精细化工：染料、颜料、各种浆料、化工助剂、粘胶剂、107胶、硅油、皮革油、乳化炸药各种胶体料等。

食　　品：巧克力、炼乳、酸奶、蜂蜜、糖浆、蔗糖、番茄汁、浓缩果汁、果酱、冰淇淋、牛奶、酵母泥浆、肉浆、果冻、调味品、酒糟、大豆蛋白、面粉浆等。

造　　纸：聚丙烯酰胺(PAM)、碳酸钙、淀粉糊、羧基丁苯/丙苯胶乳、松香、松香胶、纸浆、填料、干强:剂、湿强剂、施胶剂、助留助滤剂、消泡剂、涂布、水处理化学品等。

化　　纤：粘胶浆粥、PVA、维纶浆料、腈纶浆料、胺纶浆料、聚脂切片、涤纶、丙纶、人造纤维、功能性纤维等。

医　　药：各种药膏、浸膏、药乳液、药丸糊、糖浆、保健品、药剂等。

涂　　料：油漆、涂料、油墨、绝缘漆、树脂、助剂、有机溶剂等。

暂未实现,敬请期待

86-513-83351692

Two-stage dispersing emulsifier

Products