Siphon mixing emulsifier_Nantong Fleck Fluid Equipment CO., LTD.

The high-shear vertical emulsifier (siphon mixing emulsifier) is installed in the middle of the tank to perform mixing reaction, dispersion emulsification, shear pulverization in the reaction kettle. The vertical emulsifier consists of a frame, a rotating stator and a dispersing wheel. Under the driving of the motor, the small dispersing disc installed in the middle of the tank starts to work quickly, dispersing, cutting, floating in the upper middle part and some additives, forming the pot flow. It just enhances the circulation of the whole liquid material to simultaneously disperse, emulsify and homogenize the upper and lower layers. At the same time, the bottom emulsification head is also sucked in two directions, and the material is sucked into the pulverized grinding zone from the middle and the bottom. First, the slanted blade is cut and dispersed, and then the grinding blade is used for pulverization and emulsification. In addition to severe maneuvering and liquid shearing, the material is also subjected to extrusion, impact, tearing and friction. The material is continuously circulated up and down throughout the working process, and the precision rotor and stator and the dispersing disc cooperate. The material particles are quickly torn in a very short time and pulverized into submicron fineness to achieve the purpose of dispersion, emulsification and homogenization.

Combination of two-stage dispersing disc and high-shear vertical emulsifier High shear vertical emulsifier combined with horizontal fine emulsifier

High viscosity high shear vertical emulsifier head Low viscosity high shear vertical emulsifier head

Corresponding parameter set not found, please add it in property template of background

Model	DSL2	DSL4	DSL7	DSL11	DSL15	DSL18	DSL22	DSL30	DSL37	DSL45
Power kw	2	4	7.5	11	15	18	22	30	37	45
Rotating speed r/min	2950	2950	2950	2950	2950	2950	2950	1440	1440	1440
Stator outer diameter mm	89	104	120	140	158	180	210	250	280	320
Mixing paddle mm	80	100	110	130	148	170	200	240	270	310
High speed dispersion disk mm	80	100	110	130	148	170	200	240	270	310
Axis length mm	622	838	1130	1200	1280	1300	1370	1500	1700	2000
Volume m³	15-100L	50-200L	0.09-1	0.1-1.5	0.2-2	0.3-2	0.5-3	0.8-5	1.5-8	3-20

Siphon mixing emulsifier features:

The siphon mixing emulsifier is mainly used in the process of high-speed rotation through the linked head of the engine to the engine during operation.

The emulsifier makes useful shearing, impacting and smashing of the material, so that the material becomes more delicate and useful to promote the fusion of oil and water. milk

The machine cuts, scatters and hits the material. This material will become more delicate and promote the integration of oil and water. Sauce, fruit in the food industry

Juice and so on. Ointment in the pharmaceutical industry. Emulsifiers are used in petrochemicals, paints and coatings. Emulsifier in test or industrial production process

Mixing, stirring, smashing, homogenizing, emulsifying and grinding. The emulsifier homogenizer rotates at a high speed through the rotor.

The high-frequency, intense circumferential tangential speed, angular velocity, etc. are summarized to kinetic energy efficiency; under the effect of the stator, the stator and the rotor are reasonably narrow

The gap is composed of intense, reciprocating hydraulic shearing, conflict, centrifugal kneading, liquid flow collision and other induction effects, and the material circulates back and forth in the container.

In the course of the operation, the product is finally obtained.

　　The siphon mixing emulsifier consists of a frame, a rotating stator and a dispersing wheel. Under the driving of the motor, the small dispersing disc installed in the middle of the tank starts to work quickly, dispersing, cutting, floating in the upper middle part and some additives, forming a pot flow. It just enhances the circulation of the whole liquid material to simultaneously disperse, emulsify and homogenize the upper and lower layers. At the same time, the bottom emulsification head is also sucked in two directions, and the material is sucked into the pulverizing grinding zone from the middle and the bottom. First, the slanting blade is cut and dispersed, and then the grinding blade is used for pulverization and emulsification. In addition to severe maneuvering and liquid shearing, the material is also subjected to extrusion, impact, tearing and friction. The material is continuously circulated up and down throughout the working process, and the precision rotor and stator and the dispersing disc cooperate. The material particles are quickly torn in a very short time and pulverized into submicron fineness to achieve the purpose of dispersion, emulsification and homogenization.

Accessories: Equipment selection parameters and technical requirements (downloadable)

　First, the technical parameters of your company's materials:

Material medium

Processing capacity(m³/h)

Liquid category

□Water-based,　□Oily,　□Solvent

Solid category

□Agglomerate,　□Crystals,　□Primary particle

Liquid to solid ratio(%)

Viscosity Pa.s

Material flow

□Very good (water),　□可以，　□difference,　□Very poor

Feed contains

Large particles mm,Take up %

Medium particle mm,Take up %

Small particles mm,Take up %

Solid particles

(□fragile, □Not fragile, □Viscous)

Discharge granule μm

Head m

temperature ℃

Remarks:

　Second, your company's requirements for equipment:

　1. Material contact part material

□stainless steel 304，　□stainless steel 316L，　□Duplex steel 2205，　□TA2，　□HastelloyC276

　2, rotating stator material

□stainless steel 304，　□stainless steel 316L，　□Duplex steel 2205，　□TA2，　□Hastelloy C276，

□Wear-resistant steel NM500，　□Wear-resistant steel 38CrMoAl，　□Tungsten carbide treatment,　□Emery treatment

　3, sealed

□Ordinary single-sided mechanical seal,　□Ordinary double-sided mechanical seal,　□Custom double-sided mechanical seal

O-ring configuration

□Ding O-ring,　□Fluoro rubber O-ring,　□Fluorine-containing O-ring,　□Perfluoroether O-ring

Material contact surface

□Tungsten carbide-silicon carbide,　□Tungsten carbide-tungsten carbide,　□Silicon carbide-silicon carbide

　4, the motor

□Ordinary motor,　□Inverter motor,　□Ordinary explosion-proof motor,　□Explosion-proof inverter motor,　□Dust explosion-proof motor

□Class 2 energy efficient motor,　□Marine motor,　□Waterproof motor

□Self-contained control box

□With control box

　Third, the corresponding device model:

Full name of the equipment

Model

Processing capacitym³/h)

Motor Power(kw)

Amount

Remarks

other

Fill in the unit:　　　　　　　　　　Fill in the person:　　　　　　　　　　phone:

Daily chemical industry: AES、LAS、AOS、MES、K12、Glycerin, sorbitol, fatty alcohol, shower gel, skin cream, shampoo, hand soap, toothpaste, soap, detergent powder, etc.

Fine Chemicals:Dyes, pigments, various pastes, chemical additives, adhesives, 107 glue, silicone oil, leather oil, emulsion explosives, various colloidal materials.

Food:Chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated juice, jam, ice cream, milk, yeast mud, meat, jelly, condiments, vinasse, soy protein, flour, etc.

Paper production:Polyacrylamide (PAM), calcium carbonate, starch paste, carboxylated butylbenzene/propylbenzene latex, rosin, rosin gum, pulp, filler, dry strength: agent, wet strength agent, sizing agent, retention and drainage aid, elimination Foaming, coating, water treatment chemicals, etc.

Chemical fiber:Viscose porridge, PVA, vinylon pulp, acrylic pulp, amine pulp, polyester chips, polyester, polypropylene, rayon, functional fiber, etc.

Medical medicine:Various ointments, extracts, drug lotions, pill pastes, syrups, health products, pharmaceuticals, etc.

Coating:Paints, coatings, inks, insulating varnishes, resins, auxiliaries, organic solvents, etc.

暂未实现,敬请期待

86-513-83351692

Siphon mixing emulsifier

Products