Jet flow mixing emulsifier_Nantong Fleck Fluid Equipment CO., LTD.

捷流混合乳化机　 Jet Flow Dispersing Emulsifier is a kind of mixed liquid emulsified homogenizing machinery suitable for re-food, beverage, chemical, biochemical, petrochemical, pigment, dye, coating, pharmaceutical and other fields. The overall structure is simple and small. It has the advantages of light weight, easy operation, low noise and stable operation. It has the biggest feature. It does not use grinding media in the production process, and integrates high-speed shearing, dispersing, milking, homogenizing, mixing and crushing. Adjusting the rotating rotor to drive the liquid back under the action of the diversion chamber produces a strong vertical flow of liquid, and the liquid in the container begins to circulate as a whole to achieve macroscopic mixing. On the other hand, a high-speed rotating rotor can produce a certain shear turbulence that is necessary for micro-mixing. These micro-mixed liquids are dispersed into all corners of the container as the finishing stream circulates. All the liquid in the container can be thoroughly dispersed and mixed, which is completely different from the traditional mixer.

　捷流混合乳化机

Corresponding parameter set not found, please add it in property template of background

Jet flow dispersing emulsifier technical parameters:

Model	Processing capacity L/h	Motor Power kw	Rotating speed r/min
RHJ-80JL	20-100	1.5	2980
RHJ-100JL	50-300	2.2	2980
RHJ-120JL	100-500	4	2980
RHJ-140JL	200-800	5.5	2980
RHJ-140JL	200-800	7.5	2980
RHJ-160JL	300-1000	11	1450-2980
RHJ-160JL	300-1000	15	1450-2980
RHJ-180JL	500-1500	18.5	1450-2980
RHJ-200JL	800-2000	22	1450
RHJ-220JL	1000-3000	30	1450
RHJ-240JL	1500-5000	37	1450
RHJ-270JL	2000-8000	55	1450
RHJ-290JL	3000-10000	75	1450

Oblique grooved emulsification head advantages:

1. Vertical dispersion mixing of the overall liquid stream;

2. The flow does not produce vortices;

3. No precipitation will occur at the bottom of the container;

4. Produce high shear force, which can reduce the size of the particles and accelerate the reaction;

5. The amount of air infiltration is small;

6. High efficiency mixed emulsification makes the equipment suspension easier to mix;

　　Adjusting the rotating rotor to drive the liquid back under the action of the diversion chamber produces a strong vertical flow of liquid, and the liquid in the container begins to circulate as a whole to achieve macroscopic mixing. On the other hand, a high-speed rotating rotor can produce a certain shear turbulence that is necessary for micro-mixing. These micro-mixed liquids are dispersed into all corners of the container as the finishing stream circulates, and all the liquid in the container can be thoroughly dispersed and mixed, which is the traditional mixer mixing method is completely different.

Accessories: Equipment selection parameters and technical requirements (downloadable)

　First, the technical parameters of your company's materials:

Material medium

Processing capacity(m³/h)

Liquid category

□Water-based,　□Oily,　□Solvent

Solid category

□Agglomerate,　□Crystals,　□Primary particle

Liquid to solid ratio(%)

Viscosity Pa.s

Material flow

□Very good (water),　□可以，　□difference,　□Very poor

Feed contains

Large particles mm,Take up %

Medium particle mm,Take up %

Small particles mm,Take up %

Solid particles

(□fragile, □Not fragile, □Viscous)

Discharge granule μm

Head m

temperature ℃

Remarks:

　Second, your company's requirements for equipment:

　1. Material contact part material

□stainless steel 304，　□stainless steel 316L，　□Duplex steel 2205，　□TA2，　□HastelloyC276

　2, rotating stator material

□stainless steel 304，　□stainless steel 316L，　□Duplex steel 2205，　□TA2，　□Hastelloy C276，

□Wear-resistant steel NM500，　□Wear-resistant steel 38CrMoAl，　□Tungsten carbide treatment,　□Emery treatment

　3, sealed

□Ordinary single-sided mechanical seal,　□Ordinary double-sided mechanical seal,　□Custom double-sided mechanical seal

O-ring configuration

□Ding O-ring,　□Fluoro rubber O-ring,　□Fluorine-containing O-ring,　□Perfluoroether O-ring

Material contact surface

□Tungsten carbide-silicon carbide,　□Tungsten carbide-tungsten carbide,　□Silicon carbide-silicon carbide

　4, the motor

□Ordinary motor,　□Inverter motor,　□Ordinary explosion-proof motor,　□Explosion-proof inverter motor,　□Dust explosion-proof motor

□Class 2 energy efficient motor,　□Marine motor,　□Waterproof motor

□Self-contained control box

□With control box

　Third, the corresponding device model:

Full name of the equipment

Model

Processing capacitym³/h)

Motor Power(kw)

Amount

Remarks

other

Fill in the unit:　　　　　　　　　　Fill in the person:　　　　　　　　　　phone:

Daily chemical industry: AES、LAS、AOS、MES、K12、Glycerin, sorbitol, fatty alcohol, shower gel, skin cream, shampoo, hand soap, toothpaste, soap, detergent powder, etc.

Fine Chemicals:Dyes, pigments, various pastes, chemical additives, adhesives, 107 glue, silicone oil, leather oil, emulsion explosives, various colloidal materials.

Food:Chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated juice, jam, ice cream, milk, yeast mud, meat, jelly, condiments, vinasse, soy protein, flour, etc.

Paper production:Polyacrylamide (PAM), calcium carbonate, starch paste, carboxylated butylbenzene/propylbenzene latex, rosin, rosin gum, pulp, filler, dry strength: agent, wet strength agent, sizing agent, retention and drainage aid, elimination Foaming, coating, water treatment chemicals, etc.

Chemical fiber:Viscose porridge, PVA, vinylon pulp, acrylic pulp, amine pulp, polyester chips, polyester, polypropylene, rayon, functional fiber, etc.

Medical medicine:Various ointments, extracts, drug lotions, pill pastes, syrups, health products, pharmaceuticals, etc.

Coating:Paints, coatings, inks, insulating varnishes, resins, auxiliaries, organic solvents, etc.

暂未实现,敬请期待

86-513-83351692

Jet flow mixing emulsifier

Products