Slag refiner_Nantong Fleck Fluid Equipment CO., LTD.

The slag refiner is a new type of slag crushing and refining equipment. It is widely used in various fine chemicals, petrochemicals and other alkali slag, coal slag, slag and other small and brittle granules and various residues of pulverizing and refining. It is designed and manufactured on the special rotating stator to produce a multi-purpose new slurry pump with a combination of shearing zone, crushing zone, refining zone and conveying zone. The residue must be used in the process of crushing and refining. After mixing with water or liquid, it can enter the pulverizing pump through the pipeline. After entering the slag refiner pump body, the cutting blade first impacts the large particles by impact shearing, pulverization, grinding and refining. The high-efficiency residue refining equipment is The utility model has the advantages of low noise, high efficiency, shear pulverization and grinding conveying as one multifunctional refining equipment.

Corresponding parameter set not found, please add it in property template of background

Model	Processing capacity ㎥/h	Motor Power kw	Import and export size mm	Installation method
MJB-40	0.1-1.5	5.5-11	50/40	Horizontal or split
MJB-50	2-4.5	7.5-11	65/50	Horizontal or split
MJB-65	3-7	11-30	80/65	Horizontal or split
MJB-80	5-10	22-45	100/80	Horizontal or split
MJB-100	8-15	37-55	125/100	Horizontal or split
MJB-125	10-20	45-90	150/125	Horizontal or split
MJB-150	15-25	55-110	175/150	Horizontal or split
MJB-175	20-30	90-132	205/175	Horizontal or split
MJB-200	30-50	110-160	250/200	Horizontal or split

(1) Strong shearing, pulverizing and refining conveying functions

(2) Quiet design, no noise, good dynamic balance, no vibration

(3) The selected grinding material is 304, 316L, 2205, 2Cr13 and wear-resistant alloy steel for nitriding treatment or tungsten carbide treatment.

(4) The gap can be adjusted, the adjustment distance is 0.3~8mm, and the refining particles can be made according to the user's needs.

(5) Sealable double-sided water-cooled mechanical seal or single-sided liquid-cooled mechanical seal

The slag refiner is designed and manufactured on a special rotating stator to produce a multi-purpose new slurry pump with a combination of shearing zone, crushing zone, refining zone and conveying zone. It is widely used in the crushing and refining of various kinds of residues such as alkali residue, cinder, dregs and slag. In the process of pulverizing and refining, the residue must be mixed with water or liquid before entering the pulverizing pump through the pipeline. After entering the slag refiner pump body, the cutting blade is used to impact the large particles by impact shearing, pulverization, grinding and refining.

The shell of the slag refiner is generally made of 304 or wear-resistant alloy steel. The rotating stator is made of high wear-resistant high-alloy forging and quenched or treated with tungsten carbide or gold-plated steel grit. The cutting and pulverizing distance is generally 0.3 mm (the adjustable distance between the rotating stators is (0.3-8 mm), and the conveying head can reach 3-20 meters.

All residues entering the slag refiner must be brittle solids and liquid mixtures such as fragile crystals, agglomerates, and filter cakes. It is strictly forbidden to enter the pump body with metal materials such as iron wire, nails and nuts. The solid particle content of the material is ≤50%. The material mixture must have fluidity. The maximum feed particle size of the large-diameter slag refiner is about 100mm. After pulverizing and refining The discharge pellets are based on user needs.

Accessories: Equipment selection parameters and technical requirements (downloadable)

　First, the technical parameters of your company's materials:

Material medium

Processing capacity(m³/h)

Liquid category

□Water-based,　□Oily,　□Solvent

Solid category

□Agglomerate,　□Crystals,　□Primary particle

Liquid to solid ratio(%)

Viscosity Pa.s

Material flow

□Very good (water),　□可以，　□difference,　□Very poor

Feed contains

Large particles mm,Take up %

Medium particle mm,Take up %

Small particles mm,Take up %

Solid particles

(□fragile, □Not fragile, □Viscous)

Discharge granule μm

Head m

temperature ℃

Remarks:

　Second, your company's requirements for equipment:

　1. Material contact part material

□stainless steel 304，　□stainless steel 316L，　□Duplex steel 2205，　□TA2，　□HastelloyC276

　2, rotating stator material

□stainless steel 304，　□stainless steel 316L，　□Duplex steel 2205，　□TA2，　□Hastelloy C276，

□Wear-resistant steel NM500，　□Wear-resistant steel 38CrMoAl，　□Tungsten carbide treatment,　□Emery treatment

　3, sealed

□Ordinary single-sided mechanical seal,　□Ordinary double-sided mechanical seal,　□Custom double-sided mechanical seal

O-ring configuration

□Ding O-ring,　□Fluoro rubber O-ring,　□Fluorine-containing O-ring,　□Perfluoroether O-ring

Material contact surface

□Tungsten carbide-silicon carbide,　□Tungsten carbide-tungsten carbide,　□Silicon carbide-silicon carbide

　4, the motor

□Ordinary motor,　□Inverter motor,　□Ordinary explosion-proof motor,　□Explosion-proof inverter motor,　□Dust explosion-proof motor

□Class 2 energy efficient motor,　□Marine motor,　□Waterproof motor

□Self-contained control box

□With control box

　Third, the corresponding device model:

Full name of the equipment

Model

Processing capacitym³/h)

Motor Power(kw)

Amount

Remarks

other

Fill in the unit:　　　　　　　　　　Fill in the person:　　　　　　　　　　phone:

Daily chemical industry: AES、LAS、AOS、MES、K12、Glycerin, sorbitol, fatty alcohol, shower gel, skin cream, shampoo, hand soap, toothpaste, soap, detergent powder, etc.

Fine Chemicals:Dyes, pigments, various pastes, chemical additives, adhesives, 107 glue, silicone oil, leather oil, emulsion explosives, various colloidal materials.

Food:Chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated juice, jam, ice cream, milk, yeast mud, meat, jelly, condiments, vinasse, soy protein, flour, etc.

Paper production:Polyacrylamide (PAM), calcium carbonate, starch paste, carboxylated butylbenzene/propylbenzene latex, rosin, rosin gum, pulp, filler, dry strength: agent, wet strength agent, sizing agent, retention and drainage aid, elimination Foaming, coating, water treatment chemicals, etc.

Chemical fiber:Viscose porridge, PVA, vinylon pulp, acrylic pulp, amine pulp, polyester chips, polyester, polypropylene, rayon, functional fiber, etc.

Medical medicine:Various ointments, extracts, drug lotions, pill pastes, syrups, health products, pharmaceuticals, etc.

Coating:Paints, coatings, inks, insulating varnishes, resins, auxiliaries, organic solvents, etc.

暂未实现,敬请期待

86-513-83351692

Slag refiner

Products