Konjac grinding refiner

Nantong Fleck Fluid Equipment CO., LTD. is a specialized equipment technology manufacturer engaged in the research and development, design, production and sales of wet shear crushing, dispersion emulsification, crushing and grinding, mixing and homogenization, garbage disposal and other equipment. Currently, it has 1 new technology research and development building, 1 graduate practice building, 1 new product project research and development team, and 2 "production, learning and research" cooperation units in universities.

Key words: shear pump | wet mill | rice refiner

Classification:

Special Equipment

Message

Related Products

Product Description

Product brief

Konjac grinding refiner is a kind of multi-function shear grinding grinding special complete set of equipment.

Technical parameters

Model	Capacity t/h	Shearing machine power kw	refiner power kw	discharge particle (mesh)
MJJ-100MY	0.05-0.2	4	7.5	40-60
MJJ-200MY	0.1-0.5	7.5	11	40-60
MJJ-500MY	0.3-1	7.5 × 2	18.5	40-60
MJJ-1000MY	0.8-3	11 × 2	30	40-60
MJJ-2000MY	1-6	15 × 2	37	40-60
MJJ-5000MY	3-10	22 × 2	45	40-60

Product Principle

1. konjac cleaning and peeling

The konjac must be cleaned and peeled before shearing and crushing. First, the konjac is soaked to soften the mud inside the bud eye and groove and at the edge, and the skin is crisp and moist. In small batch production, bamboo scraper or stainless steel scraper can be used to remove the skin of taro bud and groove, or nylon brush can be used to clean the sediment and skin on the surface of fresh konjac. During mass production, mechanical peeling can be used, and the brush installed in the machine can rotate and slide relatively between the cleaned taro balls to achieve the purpose of cleaning and peeling fresh taro. Mechanical peeling is characterized by high efficiency and low cost. The peeling rate and cleaning rate are generally 85%-90%. After peeling, konjac is quantitatively fed to the refiner by manual or mechanical conveyor belt.

2. konjac crushing grinding

The konjac grinding refiner is composed of a double-shaft blade shear crusher and a refiner. The biaxial shearing machine consists of dozens or hundreds of hexagonal or octagonal sharp blades, and the biaxial design alternately overlaps and shears each other. The angle and quantity of the biaxial blade can be adjusted according to the size or capacity of the konjac, so that the masseter muscle of the konjac can be torn and broken more effectively in the shear crushing, and finally the konjac can be cut and crushed into 6-10mm granules into the next refining process. When konjac particles enter the refiner, they can enter the refiner at the same time as ethanol for crushing and grinding. The grinding disc of the refiner is a new type of stainless steel grinding disc composed of wear-resistant and corrosion-resistant, and its pulp fineness can reach about 60 mesh. The perfect combination of these two equipment is the process of continuous shearing, crushing and grinding the pulp of the cleaned and peeled konjac, which can achieve the purpose of cleanliness, labor and labor saving and productivity.

3. konjac slurry drying

Konjac slurry drying: first of all, the wet processing of konjac slurry with centrifugal drying method to remove the residual ethanol, can also use low temperature vacuum, hot air flow, fluidized bed, boiling and other drying methods. Because konjac powder particles are small and have high moisture content, each drying process takes only a few seconds, so it cannot be dried at one time and needs to be repeated several times. The drying process should be carried out after being placed for a period of time.

Note: The user provides relevant parameters of material characteristics, or brings materials to the production base for on-site testing, and the manufacturer selects the internal structure of the grinding disc according to the characteristics of the medium.

The copyright and equipment pictures of this website belong to Nantong Flake, and those who pirate will be prosecuted.

Application areas

Daily Chemical:AES, LAS, AOS, MES, K12, glycerin, sorbitol, fatty alcohol, shower gel, skin cream, shampoo, hand sanitizer, toothpaste, soap, washing powder slurry, etc.

Fine Chemicals:Dyes, pigments, various slurries, chemical additives, adhesives, 107 glue, silicone oil, leather oil, emulsion explosives, and other colloidal materials.

Food:Chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated juice, jam, ice cream, milk, yeast slurry, meat slurry, jelly, condiments, lees, soy protein, flour slurry, etc.

Papermaking:Polyacrylamide (PAM), calcium carbonate, starch paste, carboxyl butyl benzene/propyl benzene latex, rosin, rosin gum, pulp, filler, dry strength: agent, wet strength agent, sizing agent, retention aid, defoamer, coating, water treatment chemicals, etc.

Chemical fiber:Viscose pulp porridge, PVA, vinylon pulp, acrylic pulp, amine pulp, polyester chips, polyester, polypropylene, man-made fibers, functional fibers, etc.

Medicine:All kinds of ointment, extract, medicine emulsion, pill paste, syrup, medicine, etc.

Paint:Paint, coating, ink, insulating paint, resin, additives, etc.

Note: Our company can tailor solutions based on the characteristics of your material medium:

1. Conduct material testing using production-grade equipment

2. Customize equipment selection according to your material's technical specifications

3. Different materials require distinct internal structures. The following equipment internal diagrams are provided for user reference.

For detailed technical specifications, please contact:

Technical Support: 18962835399 18068155581

Sales Hotline: 18912883100 18921623100